MICROCHIPPING YOUR PET
 
What is a microchip?
A microchip is a tiny transponder, about the size of a grain of sand, that is encoded with a unique identification number. It is used for permanent identification. The technology is relatively recent, but is becoming widely available.
 
How is the microchip put into my pet?
Before insertion, the sterile microchip is scanned in the package to confirm that the identification code of the transponder is the same as that shown on the package bar code label.
 
The needle containing the microchip is loaded into the application gun or syringe, and the pet is positioned for the injection. For dogs and cats, the standard site for microchip placement is in the subcutaneous tissue along the dorsal midline (the spine) between the pet’s shoulder blades. For correct placement, the pet should be either standing or lying on the stomach. Some of the loose skin between the shoulder blades is gently pulled up, and the needle is quickly inserted. The applicator trigger is depressed, injecting the transponder or microchip into the tissues.
Once the chip is inserted, the pet is scanned to ensure that the chip is reading properly and the identification number is checked. It is now a permanent and tamperproof method that cannot be lost.
 
Does it hurt to insert the chip?
The application needle is quite large, and some clients will choose to have the microchip implanted at the time of a procedure (ie- dentistry, spay/neuter, etc), so that the pet can be anesthetized for the injection.
 
 Is there anything I have to do?
Once your pet is microchipped, you must register him or her with AVID. We will provide you with the relevant documents and contact information and will tell you if any fees are required. If you move or change your contact information, be sure to update your pet’s microchip information. If your pet is lost and recovered, this information will be used to reunite you with your pet.
 
How is the microchip detected?
The microchip can be ‘read’ with a microchip scanner, which detects the specific electronic code embedded in the chip, and displays the identification number on the scanner’s screen.
 
Since the occasional microchip may migrate, or move out of position, the microchip reader will be passed over the entire body of the pet in order to ensure that the chip will be detected if present. 
Most, if not all, humane societies and animal shelters now have microchip readers, and routinely scan all stray and injured animals. Steps are being taken to standardize the readers and develop databases that can be readily accessed.
 
My dog always wears a collar with identification tags. Isn’t this enough?
Unfortunately, collars and tags can break, be lost or be removed. When the tags are new, they are easy to read. However, as they get old and worn, it can become challenging to make out all the information that is on them.
 


  This client information sheet is based on material written by Ernest Ward, DVM.
© Copyright 2005 Lifelearn Inc. Used with permission under license. September 23, 2009